How to choose the right road marking machine?
Whether to choose a thermoplastic road marking machine or a cold paint marking machine for parking space delineation or road marking construction depends on a variety of factors, including budget, construction environment, work efficiency and marking quality needs. Below is a detailed comparison of the two types of equipment to help you make an informed choice.

1.Characteristics and application scenarios of thermoplastic marking machine

Working Principle: thermoplastic road marking machine adopts thermoplastic technology, which heats the paint to a molten state and then applies it to the ground through the scribing head.
Advantages:
- Strong adhesion: the thermoplastic coating combines closely with the ground and is not easy to fall off.
- Good abrasion resistance: suitable for high-traffic roads, the marking is durable.
- High reflectivity: the markings are clearly visible at night or under low light conditions.
- Wide applicability: suitable for parking lots, highways, city roads and other scenarios.
Disadvantages:
- High equipment cost: thermoplastic marking machine is expensive, suitable for users with sufficient budget.
- Power dependence: requires stable power supply and restricted construction environment.
- Complicated operation: requires specialized personnel for operation and maintenance.
2.Cold paint marking machine features and applicable scenes

Working principle: Cold paint road marking machine sprays the paint through high-pressure gas and evenly covers the ground.
Advantages:
- Easy to operate: no need to heat, ready to spray, suitable for quick construction.
- Flexibility: Hand-push design, suitable for small or complex environments.
- Lower cost: equipment price and construction cost are relatively low.
Disadvantages:
- Slightly inferior quality of marking: the adhesion, abrasion resistance and reflectivity of the coating are not as good as that of hot melt coating.
- Limited application scenarios: more suitable for temporary marking or low-traffic areas.
3.How to choose?
If you have sufficient budget and the construction environment permits: choose thermoplastic road marking machine to ensure high quality marking and long durability.
Limited budget or complicated construction environment: choose cold paint marking machine for flexible operation and cost reduction.
Road Marking Hopper Buying Guide
Thermoplastic road marking machine is the key equipment in road marking construction, and the specification of road marking hopper directly affects the construction efficiency and marking quality. The following are the key considerations when purchasing road marking hopper:

1.Road marking hopper specification selection
- 5cm marking hopper: suitable for fine marking work, such as parking space lines, arrows, etc. in the parking lot.
- 15cm marking hopper: suitable for medium width marking, such as lane dividers.
- 45cm marking bucket: suitable for large area marking work, such as crosswalk or wide road marking.
2.Scribing bucket material
- Stainless steel: high temperature resistance, corrosion resistance, suitable for long-term use.
- Aluminum alloy material: lightweight and easy to operate, suitable for frequent movement of the construction scene.
3.Scribing bucket maintenance and care
- Regular cleaning: clean up the paint residue in time after construction to avoid clogging.
- Check the wear and tear: check the wear and tear of the scribing bucket regularly and replace the damaged parts in time.
Frequently Asked Questions (FAQ)
Q1: What is the main difference between thermoplastic road marking machine and cold paint marking machine?
A1:Hot melt delineator uses heated paint, which has high marking quality and durability; cold spray delineator uses room temperature paint, which is easy to operate and low cost, but the marking quality is a little inferior.
Q2:How to choose the suitable road marking hopper?
A2:Choose the specification of marking hopper according to the construction demand, choose 5cm for fine marking, 15cm for medium width, and 45cm for large area construction.
Q3:What construction scenarios are suitable for thermoplastic road marking machine?
A3:Thermoplastic marking machine is suitable for parking lots, highways, city roads and other scenes that require high quality and long-lasting marking.