News – Road Marking Machine

Three common types of road marking

In the road marking construction process, we will mainly encounter three types of road marking: thermoplastic road marking, cold spray road marking and thermal transfer road marking.
Key considerations for thermoplastic marking construction

The temperature of thermoplastic marking construction should be maintained at about 180℃, the ideal range is 170℃-210℃. Before construction, key equipment such as thermoplastic kettle, thermoplastic road marking machine should be inspected carefully and regularly to ensure that they are in the best working condition.
What equipment is needed for road marking?

In urban and rural road marking operations, commonly used equipment covers small and medium-sized marking machine (specifically divided into thermoplastic road marking machine, cold paint road marking machine and two-component marking machine), thermoplastic kettle, pre-marking machine, as well as under the coating and other auxiliary materials and equipment.
The solution of unstable pressure of road marking machine

The number one factor could be a lack of hydraulic fluid in the marking machine, which can directly lead to a drop in cold spray pressure.
How much does a meter of road marking cost?

How much does a meter of road marking cost? This is actually a relatively complex question, as the price is affected by a number of factors. Generally speaking, if the price is calculated on the basis of area, the price per square meter is around $30 to $40; while if the price is billed on…
How to choose road marking paint

The selection of road marking paint should be based on the type of road, traffic flow, climatic conditions, construction conditions and cost budget and other factors. Only by choosing the right paint can we ensure the clarity, durability and safety of road marking paint and provide road users with a safe and convenient travelling environment.
Road Marking Construction Technical Specifications

This standard specifies the general requirements of road traffic marking project, construction preparation, construction technology, construction points, quality inspection and other basic technical standards, is the technical basis for road traffic marking construction and acceptance.
How to avoid the road marking machine construction process cracks, marking layer spalling

In the reflective hot melt marking construction process, road cracks, marking layer spalling is a common problem, how can we avoid, need to comprehensively consider a number of factors, and take appropriate preventive measures.
How to choose road marking machine

choosing a road marking machine is a decision-making process that integrates many factors. By understanding the project requirements, evaluating paint compatibility, comparing equipment features and types, considering workload and efficiency, planning budgets, and paying attention to training and support services
Road marking removal method and main equipment

Some marking removal methods can remove the marking cleanly, but it will cause damage to the road surface, affecting the road landscape, and increasing the road maintenance cost. Therefore, choosing the right road marking removal method is crucial.
Paint commonly used in road marking machine

The types of paints used in road marking machines mainly include solvent-based paints, water-based paints, thermoplastic paints, epoxy paints, polyurethane paints, acrylic paints and so on.
What are the different types of road marking machines?

What are the different types of road marking machines? Road marking machine is usually divided into three main categories: hot melt road marking machine, cold paint road marking machine and two-component road marking machine.
The difference between thermoplastic road marking machine and cold paint road marking machine

The main difference between thermoplastic road marking machine and cold paint road marking machine lies in the construction process, materials, efficiency and cost.