5.5HP Gasoline Road Marking Removal Machine
Stepless sweep adjustment lets you strip cold paint, thermoplastic residuals, and slurry without gouging asphalt. Dual-purpose design cleans and prepares surfaces before new marking—boosting adhesion and eliminating ghost lines. Compact, fuel-independent, and OEM-customizable. Ships in 7 days. One machine, fewer callbacks, better lines.
BASIC INFO
Technical Specifications
| Parameter | Specification |
|---|---|
| Engine | 5.5HP gasoline engine |
| Sweep Strength | Stepless adjustable (strong / medium / weak) |
| Wind Wheel | Turbocharging system |
| Wind Power | Adjustable |
| Steel Wire Brush | Wear-resistant, soft steel wire construction |
| Rubber Wheel | Wear-resistant compound |
| Dimensions | 1180 × 560 × 860 mm |
Road marking removal machine frame is equipped with sweeping strength regulator, according to the construction requirements for strong, medium, weak stepless adjustment. The machine can also be used for road marking construction, the road on the dust cleanup, enhance the adhesion of the marking and ground, improve the efficiency of the cleaning work before construction, especially for the construction of high requirements of the marking construction of one of the indispensable auxiliary equipment.
Application Scenarios
- Highway maintenance depots: Removing outdated lane markings before re-striping with thermoplastic road marking machine equipment
- Parking lot renovations: Stripping old stall lines and directional arrows for layout changes
- Municipal road departments: Preparing concrete and asphalt surfaces prior to new cold paint application
- Airport and industrial pavement: Removing temporary markings and rubber deposits from apron areas
- Rental fleets: A versatile, low-maintenance addition to surface preparation equipment inventories
Why Surface Preparation Before Re-Marking Matters
Research and field practice confirm that inadequate removal of old markings leads to “ghost lines”—faint residual outlines that confuse drivers, particularly at night or in wet conditions. More importantly, residual paint and surface contaminants drastically reduce the adhesion of new road marking machine applied materials, increasing the risk of premature peeling and delamination.
This machine addresses both problems in a single pass. For contractors operating a road marking machine fleet, integrating this removal unit into the workflow means fewer callbacks, better line durability, and measurable savings on rework.
FAQ:
Q: Can this machine remove thermoplastic road markings?
A: Yes, with limitations. The steel wire brush configuration is effective on thin to medium thermoplastic layers and weathered cold paint. For thick, intact thermoplastic, a dedicated carbide milling-type road marking removal machine may be required. We recommend testing on a small area to confirm suitability for your specific coating thickness.
Q: Can I customize the machine with my brand?
A: Yes. We offer OEM and ODM services including custom colors, branding, and minor specification adjustments. Please contact our sales team with your requirements.
Q: What is the delivery time?
A: Standard configurations ship within 7 days. Custom-designed units require approximately 20 days for production and preparation.
Q: Does the machine require special maintenance?
A: Routine maintenance is straightforward: inspect the steel wire brush for wear before each use, check engine oil levels, and clean the brush housing after working in dusty conditions. The wear-resistant brush and rubber wheels are designed for extended service life under normal contractor use.
